CASTING (CAST COPPER ALLOY)|
METAL co. specialzes in continuous cast alloy product, centrifugal cast bronze,
EPC casting, sand casting and finished machine parts. GABSAN METAL products produce
bar, tube and plate (strip) in custom and standard sizes.
products line includes leaded bronze, aluminium bronze, phospher bronze, high
tin bronze, specially alloy.
provides the customers looking for diverse requirements with complete solution
from raw material to finished products.
machining processes including cutting, machning, grinding, milling, oil-grooving,
graphite plugging (Oilless bearing), graphite grooving.|
water jet cutting is available for copper alloy plate produts.
products are sold worldwide through its direct sales network.
improvements continues today by combining quality in craftsmanship with the computerization
of our process and inventory control laboratory assures that the customer's most
exact metallurgical and tolerance requirements are met. Such precision casting
is the result of GABSAN's metallurgical expertise. Our laboratory performs analyses
by optical emission spectrometry statistical process control methods are used
to trace the function of on-going casting.
control and casting methods meet or exceed standard A.S.T.M. Thus GABSAN customers
are assured of consistent high quality casting everytime.
metallurgical documentation department is capable of providing you with the following
certification with mercury free statement.
testing-tensile strength, yield strength, elongation, hardness.
and etched samples of casting cross section.
to all applicable commercial.
technology of molding liquid metal has improved over the years. Rather than pouring
the metal from the top, the casting crucible is furnace-fed an under pouring method
from continuous melting source. The molten bornze is maintained at the correct
holding temperature in a totally enclosed crucible.Any dirt, dross or gases present
rise to the top of the melt and left behind in the casting process. Acting as
a riser, the bronze prevents the formation of shrinkage cavities which would otherwise
introduce imperfections in the final product.