BABBITT GRAPHALLOY

For operating temperatures upto 300^o F for applications is in inacessible places or where oil or grease cannot be used. Babbitt GRAPHALLOY is unexcelled for medium load-medium speed or medium load-high speed applications, pump bushings, thrust washers, and rotary seal rings.

COPPER GRAPHALLOY

For operating temperatures upto 750^o F, this material is ideally suited for applications where ordinary lubrication cannot be used. It is most commonly used in low speed-heavy load applications such as drying oven conveyor bushings, high temperature stirring shafts, and agitators. As a material for current-carrying bushing applications, Copper GRAPHALLOY is an excellent solution.

BRONZE GRAPHALLOY

This material is used on many special appliations and is particularly useful for miniature bushings. Some grades are suitable for operating temperatures upto 750^o F.

SILVER GRAPHALLOY

Available in a wide variety of grades, Silver GRAPHALLOY is recommended for many f the most difficult self-lubricating busing applications such as roller contacts, ball-bearing shorting rings, high frequency chokes, and critical instrument and control equipment. Although it is primarily an electrical contact or brush material par excellence, it is often used as a bushing material in chemical solutions which attack other lubricants or metallic busings, but which do not affect Silver GRAPHALLOY. Extraordinary current-carrying bearing applications have also been made possible through the use of Silver GRAPHALLOY.

ANTIMONY GRAPHALLOY

For low friction applications at higher temperatures.

NICKEL GRAPHALLOY

For chemical and atomic applications requiring broad chemical inertness with exceptional toughness.

SPECIAL GRAPHALLOYS

For special conditions, other types of GRAPHALLOY are available. New types are being developed to meet the special needs of a wide variety of industries. There are several hundred grades of GRAPHALLOY.